1.Once been prepared, apply the first layer, which is called "grout" because mortar must be a fluid consistency.
2.Lanza the material with the paddle from the bottom up and then support the rule in the splines (see how prepared above), turn up the mortar with the rule supported by the aforementioned gavest to achieve uniformity in the finish.
3.Raye this first layer with the stirrer before it dries, so that the second coat will bond better. 4.Deje
spend at least a week to apply the second layer. 5.Once
apply a second coat before it dries remove irregularities with a flat trowel or wooden, circular motions.
6.Si during the application of cement plaster begins to dry, you can moisten it with water splashing picel or round brush.
2.Lanza the material with the paddle from the bottom up and then support the rule in the splines (see how prepared above), turn up the mortar with the rule supported by the aforementioned gavest to achieve uniformity in the finish.
3.Raye this first layer with the stirrer before it dries, so that the second coat will bond better. 4.Deje
spend at least a week to apply the second layer. 5.Once
apply a second coat before it dries remove irregularities with a flat trowel or wooden, circular motions.
6.Si during the application of cement plaster begins to dry, you can moisten it with water splashing picel or round brush.
0 comments:
Post a Comment