Search For Ships By Name

Connection of Socket-key-220v AC plug

The electrical connection of a lamp 220v is very simple, we can connect without any problems. The plus (+) plug a cable into the ignition key and connect it to one side. Fasten the cable end with the screw from the tap, do not keep any movement. On the other side of the button, another cable goes into the socket and binds to the same cable. Of free cable that remains in the socket, it will join the negative (-).

Please note:

1) Since this is CA, if we invested a way to connect the lamp, and we started to connect the neutral or negative to the key, the other side of the button the cable into the socket, and then from positive to free cable fixture, and also official. But we should not do so because it would simpre electricity socket and it can become dangerous when changing a bulb.

2) Disconnect power when performing any electrical installation work.

3) The adjustment of the cables have to be firm, if they have any movement, or are not properly adjusted, it can produce heat and then a cortocicuito.

4) must be removed the rubber from the ends of cables to connect, approximately 3cm from the tip. If the cable is a simple copper wire thickness, is formed with a ring plier tips to fit around each adjustment screw, and screw it so it snaps into place to prevent short circuits. If there are several strands of thin copper, screw it before forming the basket, so there are no loose ends, they may touch another piece and cause short circuits.